I am not a business by any sort of means, just did this for personal gain cause I wanted the stupid sticker and no one would make it for me. Well the ball and chain is pretty pissed about the money I spent to do it.
I couldn't find anyone to make it small enough for me, so I bought a vinyl cutter and made my own. Seeing if anyone else has interest in this. Mine is about a 6.25" x 4" outline nonreflective sticker, I can make it bigger, but not any smaller due to size constraints already (damn you RI.) I could make reflective, but since I am not a business, I don't have a big stock of vinyl, but with enough support for this project I could probably get a hold of some reflective vinyl (runs and hides from wife.) I did it as a personal project and thought I would offer it to you guys. Again I am not a shop, so I will be making these in my off time. I have a couple pics of what I did below. The one on my helmet is not the best quality shot of it because I was lazy after I made the first one and didn't wet apply, so I got a lot of creases in application. That is my fault because of the round surface and my lame attempt at application without wetting the surface, not the stickers. Border was made thick to allow for small cuts, so some states are not see through, but they will color visibly, well except for RI which is a dot... Price is dependent on size. Now for the pics.
Right now I have black/green/red/blue/yellow/orange/white/gray/purple vinyll. Colors can be changed to whatever you want that I have.