Results 1 to 3 of 3

Thread: Lubing Spline by removing starter

  1. #1
    Registered User
    Join Date
    Apr 2007
    Location
    Victoria, B.C. CANADA
    Posts
    3

    Angry Lubing Spline by removing starter

    I am having a shifting problem on my '02 R1150RT. I have heard that you can get some lube on the spline by removing the starter. Anybody heard anything on this?
    Bob

  2. #2
    Registered User
    Join Date
    Mar 2007
    Location
    15 M. E. Tampa
    Posts
    382

    spline loob

    Yes, there are couple of people who say this can be done using a thinned out moly lube and a long needle/hose in a syringe.
    Unfortunately, there are a bunch of other people, who are very fine mechanics, who say it won't do any good, and can end up fouling the clutch.

    I am a firm resident of the 'can't be done' clique.

  3. #3
    Nickname: Droid ANDYVH's Avatar
    Join Date
    Jun 2005
    Location
    Green Bay, WI
    Posts
    930
    First queston is, what is your shifting problem? All the gears? 1st to 2nd? 2nd to
    3rd? Do you have issues with "false neutrals" between the gears?

    Is the clutch properly set up, that is, no clutch drag when you are shifting. How about your technique with a dry clutch and a typical Oilhead 5-speed tranny?

    Do you pre-load the shift lever before you shift. Do you only use about 1/3 of the clutch lever travel as you chop the throttle at the same time for each shift. This all makes a difference in accurate shifting on Oilheads.
    Get trained! The best "performance" upgrade you can get is YOU. Visit msf-usa.org for training info.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •