Results 1 to 3 of 3

Thread: HEXHEAD Tech - R1200XX - Supplemental Rear Drive Fluid Change MY 2009

  1. #1
    Honey Badger Semper_Fi's Avatar
    Join Date
    Aug 2008
    Location
    Kingston, NH
    Posts
    5,725

    HEXHEAD Tech - R1200XX - Supplemental Rear Drive Fluid Change MY 2009

    The articles, posts and comments in this tech section are posted by individual members and reflect their personal thoughts and experiences with repairing, maintaining, and generally working on motorcycles. This information may require specific knowledge and skills, may or may not be correct or current to model.

    The authors of information found here and the BMW MOA take no responsibility for ensuring the accuracy of any information (including procedures, techniques, parts numbers, torque values, tool usage, etc.), or further for any damage of any kind or injuries incurred or caused by anyone following the instructions or information found here.

    It is the duty of the individual to either assume the liability himself for responsibly using the information found here, or to take the bike or accessory to a Dealer or other qualified professional service.


    Lastly, please ensure you dispose of your used chemicals, oils and fuels in an environmentally responsible manner. Most Auto Parts stores and service stations will accept used oil and lubricants, tires and batteries, please check for your local availability.

    For proper disposal of waste fluid please refer to this link to find approved recycling centers in your area http://earth911.com/ - special thanks to Ted for providing the link.




    This article, text and photos are Copyright of the individual authors and the BMW MOA, any copying or redistributing is permitted only by prior written authorization.



    ************************************************** ***************


    Specifics:
    - Bike shown is a 2009 R1200RT

    NOTE – please ensure you dispose of your used chemicals, oils and fuels in an environmentally responsible manner.
    This procedure will generate approximately 0.25 liter (quart) of waste gear oil.

    Please note that on model year 2009 BMW has changed the process by which to refill the rear drive.

    On this model year it is not required that the speed sensor be removed.

    Please reference the first part of this DIY (link below) to remove the rear wheel and relocate the muffler.

    http://www.bmwmoa.org/forum/showthread.php?t=35072

    This information was provided my Mike S - many thanks
    Last edited by Semper_Fi; 09-29-2009 at 02:26 PM.
    2011 R1200 GSA Smoke Grey Metallic Matt
    2009 G450X White
    IBA #35651
    Rogue Moderator

  2. #2
    Honey Badger Semper_Fi's Avatar
    Join Date
    Aug 2008
    Location
    Kingston, NH
    Posts
    5,725
    Ensure you bike is properly supported on the center-stand on a flat and level surface.

    Excerpted below from the BMW Repair CD is the process to drain and the fill the rear drive during this maintenance operation

    - Please note as of the latest update to the BMW Repair Manual the specification for the rear drive fill was changed to 180ml as of 05/09.
    Attached Images Attached Images
    Last edited by Semper_Fi; 05-27-2009 at 08:30 PM.

  3. #3
    Honey Badger Semper_Fi's Avatar
    Join Date
    Aug 2008
    Location
    Kingston, NH
    Posts
    5,725
    Final step for rear drive fluid change.

    The refer back to http://www.bmwmoa.org/forum/showthread.php?t=35072 for final reassembly requirements
    Attached Images Attached Images

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •