Results 1 to 15 of 16

Thread: Highway Pegs for K1200GT?

Hybrid View

  1. #1
    Registered User Ralph's Avatar
    Join Date
    Jul 2003
    Location
    Bakerstown, PA
    Posts
    44

    Question Highway Pegs for K1200GT?

    Does anyone know if somebody produces highway pegs for the K1200GT? I just bought an '06, and love it, but my knees don't like being bent too long without giving me the royal devil. Used to have Hawk Hiway pegs on my R1200RT, and that's about the only thing (and the more comfortable seat) I miss on the GT.
    Ralph
    '06 BMW K1200GT "The Wedge/Wedgie"
    '08 Royal Enfield Classic "EnnyPenny"

  2. #2
    What, me worry? GILLY's Avatar
    Join Date
    Jul 2007
    Location
    Evansville, WI
    Posts
    1,918
    Never seen anthing like that, most cures for the "GT bends" involve lower kits for the pegs or a taller saddle. You have the seat adjusted to the high setting correct?
    Gilly
    87 K75S, bought new, now sold
    07 K1200GT Bought new, now traded in
    13 C650GT
    MOA 44606

  3. #3
    Registered User Ralph's Avatar
    Join Date
    Jul 2003
    Location
    Bakerstown, PA
    Posts
    44
    Thanks, Gilly. I was hoping somebody would have seen something... I have the seat set on the high setting, and, for the summer, my wood beads clipped onto it - raises it about a half inch more. Got bar-backs and peg lowerers ordered via my Beemer dealer (European MCs of Pittsburgh) from Suburban Machinery, so I figure they'll help, but being able to ride with my legs straight every so often keeps my funky knees from feeling like somebody's drilling a hole in my kneecaps (Doc sez "it's arthritis" -- doesn't help a *&^%* bit as I have no idea what that means. I only know they hurt like blazes after about 3/4 hour in the saddle.) The saddle's the other thing BMW coulda done a more comfortable job on on this bike--everything else about it, I just love!
    Ralph
    '06 BMW K1200GT "The Wedge/Wedgie"
    '08 Royal Enfield Classic "EnnyPenny"

  4. #4
    Registered User
    Join Date
    Aug 2008
    Location
    Stoughton, WI
    Posts
    6
    I haven't seen any for the '06 K12GT either and I have been looking since '06. Keep an eye on piratesk12site.net or suburban-machinery.com. You never know when someone may come up with them. They would make a good bike darn near perfect. I have looked at the frame behind the lower plastic and don't see any nice place to try and attach some home-made ones. Then there is the problem of the lower fairing itself. One has to decide if one is going to drill through it to have pegs. I have also considered running something from rear peg mount to front peg (two attachments for support) and then forward and put highway pegs on that. The problem I saw with that is the brake pedal and shift, especially when putting your foot below the shifter for upshifts. By the time you would get something low enough that it is out of the way of feet and brake pedal, you would have to have a big upswing on the bar to get it up away from the road. The other problem with this arrangement is the kickstands on the K12GT.
    The only thing I have come up with is to change the seat height at each gas stop, so the knees aren't always at the same angle.

  5. #5
    Registered User Ralph's Avatar
    Join Date
    Jul 2003
    Location
    Bakerstown, PA
    Posts
    44
    Thanks for the heads up on the search! I just put on the Suburban machinery barbacks this morning. One problem solved. the changing of the seat height each gas stop is a good suggestion, but boy, the highway pegs would be an even better solution to the aching knees if some could be located. Trouble is too, with you, I can't see any place one could easily attach them. The one thing the BMW engineers didn't think of on what I too consider an otherwise perfect bike!
    Ralph
    '06 BMW K1200GT "The Wedge/Wedgie"
    '08 Royal Enfield Classic "EnnyPenny"

  6. #6
    2-up and havin' fun sugarhillctd's Avatar
    Join Date
    Oct 2007
    Location
    Just above the Notch, NH
    Posts
    518
    Quote Originally Posted by Ralph View Post
    ...Trouble is too, with you, I can't see any place one could easily attach them. The one thing the BMW engineers didn't think of on what I too consider an otherwise perfect bike!
    Ralph, good idea but the bodywork would seem to be a problem

    I can't imagine German engineers EVER considered highway pegs for the GT. You are talking about the country that really resisted putting cup holders in automobiles (their thought- autos are for driving not for drinking).

    John
    John & Cathy
    '92 K100RS (gone- '04 R1100S Boxer Cup)
    '12 Suzuki DRZ400
    ("kid's" bikes) '02 Kaw ZX6R- Jen's '07 Duc 800ss- Johnnie's

  7. #7
    Registered User Ralph's Avatar
    Join Date
    Jul 2003
    Location
    Bakerstown, PA
    Posts
    44
    I hear you, John. Betcha you're right on the German Engineers, too! And the bodywork really doesn't lend itself to highway pegs.

    I do kinda wonder whether BMW ever considered K-GTs for police bikes as they have the R-RTs. The latter even can come with hefty crash guards to which could be attached highway pegs. And of course, there, Hawk products and others produce pegs that can be attached to the boxer's cylinder heads. Ah well.
    Ralph
    '06 BMW K1200GT "The Wedge/Wedgie"
    '08 Royal Enfield Classic "EnnyPenny"

  8. #8
    What, me worry? GILLY's Avatar
    Join Date
    Jul 2007
    Location
    Evansville, WI
    Posts
    1,918
    That's what I noticed about the bike too. After this was brought up I was driving down the road and wondered how that would work, and put my legs out in a "highway peg" sort of location, and yeah, just no way with this fairing.
    Gilly
    87 K75S, bought new, now sold
    07 K1200GT Bought new, now traded in
    13 C650GT
    MOA 44606

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •