This once again is a great DIY from Luis Roth (aka Semper_Fi). He described it thusly:
"This procedure has the front nacelle removal and also suggestions for running a wiring harness for a GPS or any other electrical device that you would want to have mounted on the dashboard."
That said - you are responsible for any work you do on your bike. Neither the BMW-MOA or Luis Roth suggest you do this work, you are solely responsible for doing it safely and correctly.
If you have any suggestions or comments on this DIY - please PM me by clicking on my username on the left side. Thanks again to Luis for making this effort!
The articles, posts and comments in this tech section are posted by individual members and reflect their personal thoughts and experiences with repairing, maintaining, and generally working on motorcycles. This information may require specific knowledge and skills, may or may not be correct or current to model.
The authors of information found here and the BMW MOA take no responsibility for ensuring the accuracy of any information (including procedures, techniques, parts numbers, torque values, tool usage, etc.), or further for any damage of any kind or injuries incurred or caused by anyone following the instructions or information found here.
This article, text and photos are Copyright of the individual authors and the BMW MOA, any copying or redistributing is permitted only by prior written authorization.
It is the duty of the individual to either assume the liability himself for responsibly using the information found here, or to take the bike or accessory to a Dealer or other qualified professional service.
Lastly, please ensure you dispose of your used chemicals, oils and fuels in an environmentally responsible manner. Most Auto Parts stores and service stations will accept used oil and lubricants, tires and batteries, please check for your local availability.