Results 1 to 4 of 4

Thread: R100RT Fairing Part Needed...Help

  1. #1
    MGB53
    Guest

    R100RT Fairing Part Needed...Help

    I need to replace the linier gasket that trims the fairing between the outer shell and the inner pocket area - both sides - Does anyone know if a gasket substitute is out there anywhere? My Local BMW shop is clueless on this part. thanks

  2. #2
    Registered User kioolt's Avatar
    Join Date
    Apr 2003
    Location
    Maryland
    Posts
    388
    Several years ago I bought the gasket that you are talking about. My parts CD lists the part number as 46 63 2 307 190. The length is 640mm according to the parts CD. Does that sound like the right length?
    2004 R1150RT 151,500 miles , 1991 K100LT 128,000 miles, 1982 R100RT 106,900 miles
    Total 386,400 BMW miles
    AMA,BMWRA,BMWMOA
    The cheapest thing on a BMW is the nut that connects the handlebars to the seat.

  3. #3
    MGB53
    Guest

    R100RT linier gasket

    I'm not sure about the length...it runs up both sides of the inner
    fairing about 18 inches or so...maybe more.

    I'll run that parts # by my BMW shop and see if it helps them
    locate the part.

    thanks.
    mb

  4. #4
    MGB53
    Guest

    R100RT fairing gasket

    KIOOLT - Thanks for the part #. MY local shop here in Dallas
    was able to look it up, match it to the schematic, and order two of the gaskets. (one for each side) They even thought they had them in stock, but could only find the parts box in the back room.
    But they'll be here in about a week...coming from Ontario.
    Thanks so much.
    MB Dallas Tx

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •