Results 1 to 12 of 12

Thread: Earphones

Hybrid View

  1. #1
    The Blue Max 31310's Avatar
    Join Date
    Apr 2008
    Location
    Calgary Alberta
    Posts
    222

    Earphones

    Enjoy listening to tunes on the MP3 while riding my RT in the wide open spaces. Would like to know what others use that are comfortable and sound good without being played too loud. (yes I know this may be illegal etc in some areas). I wear a full face and most of the time wear ear plugs but tunes every now and again are a nice change.

  2. #2
    Troglodyte
    Guest
    Quote Originally Posted by airoilheadbeemerguy View Post
    Enjoy listening to tunes on the MP3 while riding my RT in the wide open spaces. Would like to know what others use that are comfortable and sound good without being played too loud. (yes I know this may be illegal etc in some areas). I wear a full face and most of the time wear ear plugs but tunes every now and again are a nice change.
    Nano and Shure E2B (check out Etymotic line of in ear earphones too). Not that I would ever ride with these in my ears -grin, but they minimize road noise and music sounds very good at low levels so you can remain aware of your surroundings. Good for sitting on airplanes too. Recommend a middle priced model and the ridged ear pieces for good sound and stability in ear. Clean them daily if used daily.

  3. #3
    Two Bricks Shy of a Load RocksforBrains's Avatar
    Join Date
    Feb 2007
    Location
    Idaho
    Posts
    33

    Shure e3G

    I use Shure e3G. They were about $90. They have excellent sound and noise isolation from wind etc.. As the previous poster mentioned, Etymotics have received great reviews from folks on this forum as well. One tip. I had a hard time keeping them seated in my ears correctly while putting on my full face helmet. I started using a ploypropelyne helmet liner that covers the ears as well (inset earphones, put on thin polypropelyne liner, then helmet). Now the helmet slides right over my ears (that are covered by the liner) without unseating the earphones.

    Kurt

  4. #4
    Registered User 88bmwjeff's Avatar
    Join Date
    Aug 2004
    Location
    Walnut Creek, CA
    Posts
    2,563
    I had a custom earmold headset made several years ago. They're great. The earmold portion cuts out the noise, so I can hear my MP3 player on 2-3 (volume wise).

    If you go to a rally, there's often someone doing earmolds. That's where I had mine done.

    http://earinc.com/p2-headsets-custom.php
    Jeff in W.C.
    1988 R100 RT (the other woman)
    "I got my motorcycle jacket but I'm walking all the time." Joe Strummer

  5. #5
    Has the GS-Lust The_Veg's Avatar
    Join Date
    Sep 2003
    Location
    Atlanta 'burbs
    Posts
    5,333
    Etymotic ER6i.
    2012 R1200GS

    "If you can't fix it with a hammer, it's electrical." -somebody's dad

  6. #6
    Registered User REBGEN's Avatar
    Join Date
    May 2007
    Location
    Clive, IA
    Posts
    223
    Quote Originally Posted by The_Veg View Post
    Etymotic ER6i.
    +1

    I've had a pair for a year now and they are the ticket for me. Great sound isolation from wind buffeting and they deliver very good sound. My only concern with them is the very thin (fragile?) wire from jack to each plug.
    98 R1200C Canyon Red

  7. #7
    Registered User Kenny2's Avatar
    Join Date
    Jan 2004
    Location
    Chula Vista, CA
    Posts
    247
    I have the same. They work great. Sears or any Hearing aide place can do the molds which you send off.




    Quote Originally Posted by 88bmwJeff View Post
    I had a custom earmold headset made several years ago. They're great. The earmold portion cuts out the noise, so I can hear my MP3 player on 2-3 (volume wise).

    If you go to a rally, there's often someone doing earmolds. That's where I had mine done.

    http://earinc.com/p2-headsets-custom.php

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •