Results 1 to 15 of 23

Thread: Scratched a new helmet

Hybrid View

  1. #1
    Registered User 136045's Avatar
    Join Date
    Oct 2007
    Location
    Spfld, IL
    Posts
    72

    Scratched a new helmet

    My new helmet was caught by the wind and took to rolling across the asphalt this morning as I was putting the cover on. Not how I wanted to start my morning. Any ideas on what is the best product or way to minimize the surface scratches. They do not seem to be to deep. The helmet is grey and the surface scratches are a white color with some nice black and brown asphalt marks. I hope to avoid having to resort to a bunch of stickers.

    Any ideas are appreciated.

    Russ

  2. #2
    Registered User rocketmanli's Avatar
    Join Date
    Feb 2007
    Location
    Bay Shore, NY
    Posts
    254
    I hate when that happens. I have a black Shoei and all the scratches are white. I picked up a small bottle of acrylic paint from Michael's, a local art & crafts store. Its not as glossy as the helmet, but at least it covered up my screw ups. Might also want to hit the auto parts store, and see if you can pick up some color-tinted car wax, like Color Back (?), then wax over that?
    Larry

  3. #3
    Minnesota Nice! braddog's Avatar
    Join Date
    Jun 2003
    Location
    Twin Cities - MN
    Posts
    1,926
    Quote Originally Posted by photoruss View Post
    I hope to avoid having to resort to a bunch of stickers.

    Any ideas are appreciated.

    Russ
    Well there goes MY idea...

    First off, if your shield got scratched, probably best to replace it. Secondly, since your helmet is gray, it may be hard to match any touch up paint.

    There are a lot of really neat reflective (and non-reflective) stickers/decals out there, though.
    -----------------------------------------
    Brad D. - Member #105766
    '77 R100RS - Black Beauty (big pipe, baby!)
    '94 R1100RS - Sylvia

  4. #4
    Registered User 136045's Avatar
    Join Date
    Oct 2007
    Location
    Spfld, IL
    Posts
    72
    Thanks, I might start off with a rubbing compound and see how bad it is after that. Shield is ok. It took its punishmnet on the sides near the point of attachments.

    Thanks for the input. I may end up with stickers. any good suggestions

    Russ

  5. #5
    Registered User mistercindy's Avatar
    Join Date
    Feb 2005
    Location
    N. Dallas 'burb
    Posts
    778

    Question

    Lets see if I have this right. You're concerned about some scratches on a helmet? Is that right?

    No deep gouges?

    It didn't fall from five or six feet high and bang on concrete?

    You didn't have a wreck or anything like that?

    No reason to think you need to replace the helmet?

    The helmet just... "rolled across the asphalt." Without you in it, right?

    And you want to... how did you put it... "minimize" the damage.




    That's it, huh. Really?




    Okay, then. Here's my $0.02, but given your concern I suspect its not what you want to hear. If the shield is scratched then replace it. Otherwise, who cares? Just put on your lid and ride.
    Last edited by mistercindy; 05-15-2008 at 09:59 PM.
    Grant
    '05 R1200GS
    Former owner of an '03 R1150R
    BMWMOA #113847

  6. #6
    Registered User bmwbubblehead's Avatar
    Join Date
    Apr 2003
    Posts
    111
    agree with others, replace the shield and ride ride ride.... it will prolly happen again...

  7. #7
    RK Ryder
    Join Date
    Sep 2005
    Location
    London, Ontario
    Posts
    2,044
    I understand your frustration. Your situation reminds me of when I got my new Shoei. I didn't wish to damage it taking it back and forth from the garage and house, so made a shelf in the garage just for it. Of course while working on the shelf, the helmet carefully sat on the floor on some cardboard. My clumsy feet knocked it over and gave it the scratches that I was trying to avoid. My local Honda dealer gave me some magic "stuff" I rubbed into the scratches and for the most part, they were less noticeable. In time, I never noticed the scratches.
    Paul
    Retired and riding my RTs, the '87 K100 & the '98 R1100 !
    Treasurer of the Forest City Motorrad Club #159
    Knights of the Roundel #333

  8. #8
    BobFV1
    Guest
    How far dd your helmet fall? If the answer is more than about 2 feet, you either need to have it professionally inspected or you need to buy a new one, IMO. Others may have different opinions, but why really wear a helmet which may have a compromised shell? If you knew a condom might have a pinhole and you were trying to prevent pregnancy, would you use it?

    Gravity is the enemy of motorcycle helmets. If you never leave it off the ground in an insecure place, it will never fall to the ground and require replacement. Teaching MSF classes I always make sure to ride my students about this and will not tolerate helmets hung on rear view mirrors, left on seats, etc.

    Anyway, good luck with your scratched and possibly compromised helmet.

  9. #9
    Registered User 88bmwjeff's Avatar
    Join Date
    Aug 2004
    Location
    Walnut Creek, CA
    Posts
    2,555
    Since helmets are usually colored "plastic", I would try something like Meguirs Plastic cleaner and polish.
    Jeff in W.C.
    1988 R100 RT (the other woman)
    "I got my motorcycle jacket but I'm walking all the time." Joe Strummer

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •