Results 1 to 2 of 2

Thread: Tank removal?

  1. #1
    Happy to be here! :) The_Veg's Avatar
    Join Date
    Sep 2003
    Location
    Atlanta 'burbs
    Posts
    5,314

    Tank removal?

    Very little plastic needs removing to get the tank off a K100RT. If memory serves, you only need to remove the left lower fairing panel, and then only so you can get to the fuel lines and electrical connetctions. A single 10mm bolt at the rear secures the tank. Remove that bolt and pull the tank rearward.
    If you do go the direct-battery route, don't forget a fuse holder in-line on the positive side!
    Bikeless for now...but not for much longer!

    "If you can't fix it with a hammer, it's electrical." -somebody's dad

  2. #2
    Happy to be here! :) The_Veg's Avatar
    Join Date
    Sep 2003
    Location
    Atlanta 'burbs
    Posts
    5,314
    OOPS!

    That was supposed to be a reply to the thread about installing the accessory jack on the K100RT...

    How about a little of that Immoderator Magic here?
    Bikeless for now...but not for much longer!

    "If you can't fix it with a hammer, it's electrical." -somebody's dad

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •