Results 1 to 4 of 4

Thread: cyl head re-torque

  1. #1
    Registered User
    Join Date
    Dec 2004
    Location
    Wales Ma.
    Posts
    165

    cyl head re-torque

    does any one know if the cyl head re-torque @ 600 mi. is the same as on an 1150 .. 15ft/lbs then 90deg + 90deg and 30ft/lbs on the8mm bolt ???

  2. #2
    Has the GS-Lust The_Veg's Avatar
    Join Date
    Sep 2003
    Location
    Atlanta 'burbs
    Posts
    5,327
    This may help:

    Torque Table
    2012 R1200GS

    "If you can't fix it with a hammer, it's electrical." -somebody's dad

  3. #3
    Registered User
    Join Date
    Dec 2004
    Location
    Wales Ma.
    Posts
    165
    Just what I needed , Thanx

  4. #4
    Kool Aid Dispenser! jimvonbaden's Avatar
    Join Date
    Mar 2004
    Location
    Alexandria, VA
    Posts
    1,182

    These are 20nm if you have to loosen them, try to find THEM in the manual or torque chart. I had a heck of a time.

    The head bolts for retorque are 20nm plus 180 degrees.

    The T-45 Torx is 40nm

    This is slightly different than the initial torque of a new head gasket.

    Jim

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •