Results 1 to 3 of 3

Thread: CLC cylinder lock replacment on side case

  1. #1
    Registered User nplenzick's Avatar
    Join Date
    Dec 2003
    Location
    Warrington, Pa.
    Posts
    370

    CLC cylinder lock replacment on side case

    I'm getting ready to replace the right outer side case that I damaged on my CLC. I'm wondering if anyone knows how to get the old lock cly. out of the damaged case and install it in the new one. I assume that you have to take the inside panal off but I can't figure how to do it. Four screws on the inside and two underneath the handle where removed and I still can't get the inside panel off. Any ideas?

  2. #2
    Focused kbasa's Avatar
    Join Date
    Mar 2003
    Location
    Marin By God County, California
    Posts
    11,639
    I haven't looked at a CLC case, but if they're anything like the system cases, there's a place on the inside of the bag to stick a paper clip in and pop the lock out. You need to have the key in it to do it.

    The IBMWR website (www.ibmwr.org) has a description of how to do it in their tech pages.
    Dave Swider
    Marin County, CA

    Some bikes. Some with motors, some without.

  3. #3
    Registered User nplenzick's Avatar
    Join Date
    Dec 2003
    Location
    Warrington, Pa.
    Posts
    370
    Thanks for the info but the clc cases are not like that. There is no access hole. I still believe the inside panel has to come off to get to the lock.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •