Pathblazer on R1150RT
I am looking for the best place to mount a Kisan Pathblazer on an R1150RT hi-beam. Originally I was going to connect it directly to the bulb as this requires to wire splicing and its hidden, however, I am worried about water getting into the light assembly. The back cover will not seat properly as the wires will be coming out though its seal. I probably need to splice the wire someplace. Any info from anyone who has installed one of these is greatly appreciated.
Fl Keys Fishing Guide
Thanks for the info. I was trying to avoid having to cut the wires but I did it this past weekend. I traced the wire to the front right hand side of the bike. Its a white colored wire. It worked very well.
Thanks for the reply.