I use this one:
Type: Posts; User: tesmsp; Keyword(s):
I use this one:
The software in the 2007 doesn't have the annoying dealer extortion service reminders.
The bearing is available through Amazon:
You may want to try this if you are handy with tools:
I found my link: http://www.autogeek.net/wurth-1z-combo.html
For $30, you get the clear lacquer that goes with it.
Mine looked as pictured above and was able to refinish it without having to remove from the engine. There is a place in the net where for $30-40 you can buy the exact color of paint and sealer. Same...
My ABS unit failed at 27000 miles on my 07 RT.
My RT had the fuel strip re-calibrated after the ZFE box was replaced. Now from full tank to the 3/4 mark, I usually get around 35 miles. Is that normal? Seems too low for me.
Thanks in advance.
Try this medicine:
From my long gone Fortran 77 days, P=(I**2)*R
I don't see any relay in the circuit diagram for the 2005 RT. The handle bar switches interface with the ZFE box and the bike software turns the ZFE output switches on when instructed by the software.
Maybe you got the low oil level on because the boxer engine was not designed to work with the crankshaft pointing to the sky.
I lost the stopper (or peg feeler) on the left side of my bike. It just sheared off leaving a broken thread inside the foot rest. The removal of the thread damaged the delicate thread cut into the...
$0 to recalibrate the old strip. :groovy
This is what the dealer had to say:
"Upon the replacement of your ZFE control unit the (central chassis electronics control unit) gets initialized. The filmstrip calibration is automatically part...
Now that the bike has a new ZFE box, the fuel indicator doesn't register more than 3/4 Full when I gas up the bike. Did the dealer forget to calibrate, will it calibrate itself or is the fuel strip...
Tyler quoted me $150 for fixing the brushes in the motor of my 2007 RT ABS unit. Good deal!!!