Have you checked the rocker arm bearings. Some of the early cages cracked on the ends and the needles fell out. Just a thought.
Type: Posts; User: PAS; Keyword(s):
Have you checked the rocker arm bearings. Some of the early cages cracked on the ends and the needles fell out. Just a thought.
No doubt he stays in touch and I try to, but sometimes things happen quite unexpectedly. Especially at low mileage. That is one of the things I dont like about the RT, you cant see what is...
I sure have read about a lot of spline, final drive and HES failures. Your lucky Paul. We know you stay on top of things.
An incident at that mileage would totally P---- me off! I have an 81 R100RT with 164k and have no fear of taking it on a tour. I also have an 03 R1150RT with 17K that keeps me wondering how far I...
After cleaning the groove with some type of solvent, I used about 6 drops of super glue at equal spacing around the boot.
I recently had a FD experience at 16.8K on my 03 1150RT, it took a while to figure out what the problem was. It turned out that the pivot bearings were loose. I took them out to have a look and one...
You have to determine if the gear oil is coming from a bad rear seal in the gearbox, or you over filled the drive shaft or if the seal in the final drive is bad. It can migrate forward into the...