Search:

Type: Posts; User: chunk; Keyword(s):

Page 1 of 2 1 2

Search: Search took 0.06 seconds.

  1. Replies
    12
    Views
    564

    You're correct on the lower mounting point. I...

    You're correct on the lower mounting point. I used these universal handle bar mounts. It requires drilling through the faring to mount the attachments to the faring. Real solid and easy on and off....
  2. Thread: motul oil

    by chunk
    Replies
    15
    Views
    1,033

    1976 r75/6..... Chunk.

    1976 r75/6..... Chunk.
  3. Replies
    15
    Views
    870

    That's what I was thinking too.

    That's what I was thinking too.
  4. Replies
    9
    Views
    817

    http://www.bmwhucky.com/010071.html About 1/2...

    http://www.bmwhucky.com/010071.html

    About 1/2 way down. Check that it's just what u want. I only looked quickly. Cheers.
  5. Thread: motul oil

    by chunk
    Replies
    15
    Views
    1,033

    Yeah, I did a lot research and concluded that...

    Yeah, I did a lot research and concluded that there aren't any compatibility issues. The Motul oil is SG rated and should be fine for top off between changes. Cheers.
  6. Thread: motul oil

    by chunk
    Replies
    15
    Views
    1,033

    motul oil

    I was going to top up between changes and have this quart of Motul 3000. I use BMW oil generally, but didn't want to do a 100 mile trip to the nearest dealer just for a quart of BMW oil.
    Any...
  7. Replies
    10
    Views
    451

    I went with the rebuild kit. It was quite easy...

    I went with the rebuild kit. It was quite easy to do and hasn't leaked drop. At least 3 years ago, maybe more. Silly place for a master cylinder though, reminds me of a VW, inside the cabin...
  8. Thread: Won't Start

    by chunk
    Replies
    6
    Views
    556

    Maybe take a look at the points and see if all is...

    Maybe take a look at the points and see if all is ok there. See that the timing is correct. That would be my next step. Good luck.
  9. Replies
    13
    Views
    519

    That's how my r75/6 center stand works. The...

    That's how my r75/6 center stand works. The springs just keep it in the up position while riding. I had two other airheads and I'm pretty sure that it was the same with them as well. Cheers.
  10. Replies
    16
    Views
    926

    Quote: "When I referred to the double cams, I...

    Quote: "When I referred to the double cams, I was referring to the two cam lobes on the spark advance mechanism. Since the camshaft (to which the advance mechanism is attached) rotates at 1/2 the...
  11. Replies
    20
    Views
    1,336

    [QUOTE=181824;941359]Ok, sounds doable, but do...

    [QUOTE=181824;941359]Ok, sounds doable, but do you cut off the top or bottom. I was thinking I would cut off the bottom, maintaining the top finish edge, and use what I cut off for a template for the...
  12. Replies
    20
    Views
    1,336

    I've cut several over the years, I use a...

    I've cut several over the years, I use a portable sabre saw with an adjustable speed control (I use a medium speed) along with a blade that is suggested for soft aluminium. There maybe specialty...
  13. Replies
    15
    Views
    449

    final update

    I've put about 150 miles on the dyna ignition since the install. I'm very pleased so far. The bike starts easily, is much smoother with the firing pulses even, no pinging and "seems" to rev a bit...
  14. Next time u have it running I would suggest that...

    Next time u have it running I would suggest that u check the timing with a strobe, especially that the advance is working correctly. Good luck. Cheers.
  15. Replies
    15
    Views
    449

    update

    I got the r75 timed this morning, it took about 1/2 hour. I was really happy with how precise the sensors and magnet was. That made for an easy procedure. I checked it with a strobe and no...
  16. Replies
    15
    Views
    449

    Ok, I did that, it seemed to simple. I was just...

    Ok, I did that, it seemed to simple. I was just checking. I'll continue tomorrow and report back.
    The bike is a 1976 r75/6. Cheers.
  17. Replies
    15
    Views
    449

    timing time

    Ok, I've got the Dyna 3 installed, and the sensor wires routed through the top engine grommet. I mounted the control module right behind the coils under the spine. The test light, lights at about...
  18. Replies
    15
    Views
    449

    Then I'm thinking the sensor wires go between the...

    Then I'm thinking the sensor wires go between the inside of the grommet and the outside of the wire bundle. Kind of just alongside the wire bundle, but still through the grommet? Thanks for your...
  19. Replies
    15
    Views
    449

    Did you have remove the diode board to get acess...

    Did you have remove the diode board to get acess to the grommet? Or can it be accomplished with the board in place. I don't mind the time, I'm just trying to get a feel of what's needed to be done....
  20. Replies
    15
    Views
    449

    sensor wires dyna 3

    I was thinking about installing this ignition on my airhead so I can correct the timing error that I have with the point set up, the instructions say to pass the pick-up wires behind the rectifier...
  21. Replies
    7
    Views
    496

    I get my terminal strips here. ...

    I get my terminal strips here.



    http://www.allelectronics.com/index.php?page=seek&id%5Bm%5D=pattern&id%5Bq%5D=Terminal+Strip

    This one might be a possibility for what you have planned. I...
  22. I just finished installing the 20 watt halogen...

    I just finished installing the 20 watt halogen lamp. It's very bright, which is good. As long as the associated wiring and handle bar switch is up to the additional current draw, it will be a nice...
  23. I've gotten several inquiries on where I...

    I've gotten several inquiries on where I purchased the 20 watt halogen bulb. I bought it from Amazon.com.


    Jimmylee, I had a hard time responding to your email through the website email. I'm...
  24. Spendy! I just ordered one from snow bums...

    Spendy! I just ordered one from snow bums recommendation, a Sylvania 20 watt. I think the number was 64115, anyway $9.51 US shipped. I think it will make a dandy DRL. Thanks again for the input.
  25. Thanks. The lamps seem easy enough to find. ...

    Thanks. The lamps seem easy enough to find. Now I'm looking for the best quality to price ratio. I've seen them as high as $12.00 . That seemed a bit pricey to me, but maybe that's what they...
Results 1 to 25 of 30
Page 1 of 2 1 2