Search:

Type: Posts; User: AntonLargiader; Keyword(s):

Page 1 of 53 1 2 3 4

Search: Search took 0.21 seconds.

  1. Replies
    10
    Views
    429

    You don't say what is wrong with the clutch. ...

    You don't say what is wrong with the clutch.

    Normal wear, you get at the minimum the three main clutch parts plus 6 (minimum) hours labor. The dealer probably put a lot more in there - good stuff...
  2. Those of who work on these bikes all the time...

    Those of who work on these bikes all the time know it's a very real issue. I've even made house calls to fix broken disconnects. Now I update them as a matter of course when I see the old plastic...
  3. My "dead battery" pile is usually about 80%...

    My "dead battery" pile is usually about 80% Westco.
  4. If you're not after 900+cc and you want something...

    If you're not after 900+cc and you want something modern, that just leaves 800 right? With stock parts at least. Find a nice R80 Nikasil piston/cylinder set and have the block or cylinders machined...
  5. You need the tapered intake stubs, different...

    You need the tapered intake stubs, different elbows and different cables.

    Some info at: http://largiader.com/articles/40mm/
  6. Replies
    56
    Views
    2,831

    I suspect it was after that that a dealership...

    I suspect it was after that that a dealership (Bob's?) was told they couldn't sell the ball caps with the roundel sewn on. But I don't know the details; I just remember they weren't available any...
  7. Replies
    48
    Views
    4,053

    Not the same, and that page actually explains it....

    Not the same, and that page actually explains it.

    When Yuasa bought Exide's industrial division, Exide kept their automotive line. Some time around 2000 Exide bought Mareg, which had been making...
  8. Replies
    56
    Views
    2,831

    Last I heard the shops do not have the right to...

    Last I heard the shops do not have the right to create BMW-branded merchandise, though. This was tested in the '90s with roundels sewn onto ball caps and luggage. It went on for a while but BMW...
  9. Replies
    14
    Views
    748

    You don't need our other thoughts, you need...

    You don't need our other thoughts, you need parts. Most likely the clutch is just worn out, but it could be a problem with the throwout bearing, pushrod or spring. You're going to have to go in there...
  10. Replies
    37
    Views
    1,164

    Regularly, I said. They don't need to; they ride...

    Regularly, I said. They don't need to; they ride their bikes and have no problems. If I replace an Odyssey, which has only happened a few times, it is from a charging problem and most likely from...
  11. Replies
    56
    Views
    2,831

    The people at BMW who manage their 'Clubs'...

    The people at BMW who manage their 'Clubs' efforts (who are part of BMW Classic IIRC) are pretty close to that issue as they get into enforcing the word mark and trademark issues with respect to the...
  12. Replies
    37
    Views
    1,164

    I have them in pretty much everything, without...

    I have them in pretty much everything, without problems. That includes a lot of customer bikes. Most of them, my own bikes included, don't get charged. In fact I discourage my customers from charging...
  13. Replies
    37
    Views
    1,164

    That poor bike. Doing that is just a bad idea....

    That poor bike.

    Doing that is just a bad idea. If the bike isn't moving and isn't under load, the oil takes a LONG time to heat up but other parts (like the exhaust, and the fairing parts close to...
  14. Use the Commander II and use the 130 front. Local...

    Use the Commander II and use the 130 front. Local guy has that and really likes it. Felt great to me.
  15. Replies
    9
    Views
    828

    BTW Bill, your old /5 has been hanging over the...

    BTW Bill, your old /5 has been hanging over the bar at the Moto Saloon for the past few years. Unfortunately, that business is being sold. I think it will hang in my shop for a while... :)
    ...
  16. Replies
    9
    Views
    828

    Or you could buy that points tool from the guy...

    Or you could buy that points tool from the guy who devised it... read this if you want.

    Available through Cycleworks and maybe directly from Paul Tavernier.
  17. Assuming you started riding at 18, you are right...

    Assuming you started riding at 18, you are right on schedule. IIRC Pieter DeWaal told us that BMW's research showed that riders were unlikely to purchase new bikes after 63. This was in the context...
  18. Replies
    8
    Views
    1,244

    I long for the day when the stop-action slow-mo...

    I long for the day when the stop-action slow-mo fast-mo fad ends. I suppose that won't be until we cure ADD.
  19. Replies
    70
    Views
    3,772

    That's putting it mildly. The whole notion of...

    That's putting it mildly. The whole notion of doing that (and it's regurgitated on all forums, with everything that is shimmed) depends on it having been right to begin with. IT BROKE. Why would you...
  20. Replies
    3
    Views
    318

    Any speedometer shop can replace the glass. I've...

    Any speedometer shop can replace the glass. I've had North Hollywood Speedometer do it for me.
  21. Replies
    7
    Views
    494

    Well, you need to decide on what forks you...

    Well, you need to decide on what forks you actually have. Those two bikes have different forks with different axles which accept different wheels. Spoked wheels are difficult with the early '80s...
  22. Replies
    7
    Views
    494

    What front wheel are you planning to use? If you...

    What front wheel are you planning to use? If you are swapping the entire R100R front end, then just go with a handlebar-mounted MC and the R100R hoses.
  23. I had this happen on a local K75. It was a bad...

    I had this happen on a local K75. It was a bad ECU output doing exactly what Paul described. I either replaced the ECU or rewired it so the pump was powered by something else, I forget.

    Now...
  24. By turning one relative to the other.. ?? Nut...

    By turning one relative to the other.. ??

    Nut in deep socket, or nut in adjustable wrench, or nut in vise, or 12mm hex stock in bolt and in vise, or any number of things that you might cob...
  25. Replies
    34
    Views
    2,127

    The bike I normally ride has a sticker that...

    The bike I normally ride has a sticker that expired in 2010, and I haven't been hassled. Many people just don't have them at all.

    Sucks to live in NoVa, I know...
Results 1 to 25 of 1325
Page 1 of 53 1 2 3 4