Search:

Type: Posts; User: jeffeaby; Keyword(s):

Search: Search took 0.05 seconds.

  1. Replies
    1,366
    Views
    437,534

    Sticky: when I look at the forum on my computer, I see...

    when I look at the forum on my computer, I see all four. the attachment process is a black art...

    appears that only the last picture shows up on the forum...have do with one at a time till I...
  2. Replies
    1,366
    Views
    437,534

    Sticky: http://www.bmwmoa.org/forum/attachment.php?attachm...

    http://www.bmwmoa.org/forum/attachment.php?attachmentid=34370&stc=1&d=1354718529

    http://www.bmwmoa.org/forum/attachment.php?attachmentid=34369&stc=1&d=1354718454
    ...
  3. Replies
    1,366
    Views
    437,534

    Sticky: 85 RS BlueBoy

    http://http://www.bmwmoa.org/forum/attachment.php?attachmentid=34351&stc=1&d=1354632123Fresh out of the garage after 9 months of total rebuild. All rubber, seals, bearings (not internal engine),...
  4. checked injector pulse width at starter speed,...

    checked injector pulse width at starter speed, was about 5ms.

    Triple checked the timing at starter speed, was a tad above 6 BTDC.

    very frustrating...
  5. http://www.bmwmoa.org/forum/attachment.php?attachm...

    http://www.bmwmoa.org/forum/attachment.php?attachmentid=34348&stc=1&d=1354559037
  6. I had the bike running strong last week, once it...

    I had the bike running strong last week, once it was coughed to life from cold start. I then tried to sync the throttle bodies and idle jets at full temp around 2K rpm. Turned my shiny exhaust tubes...
  7. did another compression test following the valve...

    did another compression test following the valve shim change...all cylinders are up to snuf. surprized they are all so good at 70kmiles, but there they are.

    Still can't get the bike to start. have...
  8. oil was in cyl #1...others dry. ALL rubber...

    oil was in cyl #1...others dry. ALL rubber replaced with new (quite the investment!) during the head gasket change.
  9. oil puddle behind intake valve/compression issue '85 K100RS

    K100RS 85...removed the throttle body assembly for trouble shooting a hard to start bike. looked down into the head cavity where you can see the back side of the intake valve. Small puddle of oil...
Results 1 to 9 of 9