Thank you Mr. Glaves :)
Type: Posts; User: Slipster; Keyword(s):
Thank you Mr. Glaves :)
I am in the process in replacing my old brake lines. Ordered the kit from Spiegler.
This would be good time to replace the ABS rear brake reservoir hose. Is this hose a BMW part (can't locate...
Speaking of Batteries. Anyone had any experience with a quality Lithium Battery on their K like http://antigravitybatteries.com ?
It appears your idle pin is not set right
When your bike is warm what rpm does it idle idle at? If it is high then you have an air leak (z hose)
If that is the case you need to locate the leak...
600 miles, 3 days. The trees were just starting to get some color in places
Thank you Lee - I took a look and it is well capped. As always it is a pleasure learning another thing or two about the K :thumb
Thanks Lee. Do you have a pic or a pointer of where this nipple is? Just a minds eye view of where I start looking :dunno
Is the Funnel and Hose / Cap unique to earlier Ks or was it prevalent throughout all production years?
fwiw: I prefer the S Bars :heart
Ok I know this request is pure "Science Fiction". A request that can only be fulfilled in another time and dimension but I'll make the wish anyway.... :whistle
I would like to have a choice...
[QUOTE=98lee;892994]The K75Ss of MOA members Lee Fulton ('87), Jim Lynch ('94), and David Sword ('93) at Salem.
Nice Lee. Great Pic!!! Your 87 is stealing the show :thumb Did yours come with...
Will these work on my Bar Back equipped K75S? http://www.spieglerusa.com/brake-line-kit-54.htm :dunno
Wow - great to know this. Thanks for sharing as we can all benefit from your experience on the pos/ground situation :nod
Match the revs and preload the shifter. That applies , for me, for all gears except going up from 1st to 2nd - for that my bike likes a little descending tach starting at 3500rpm to make it smoother.
Yep that happened to me. Make sure your engine oil isn't contaminated. You will need to flush if it is. Pump is not hard to rebuild and sure will save you a lot of money if you do the work.
Took a ride west on OK Route 66 this past Saturday. Stopped at the Rock Cafe in Stroud for breakfast then headed further west to Warwick.
Warwick, OK. is a very small dot on the map with a cool...
Out for a ride to get some bugs on my body worked, repainted spoiler :thumb
4 coats of Carnauba. Spoiler back on the bike and the bike out for a ride :dance:dance:dance:dance
I wish they would dsword. I took it to a shop and they said they would not apply the 3M Clear Protectant to my spoiler.
They said it would remove the paint. They only apply to original auto factory...
One week to glass the two big cracks by the sight glass hole and do the bodywork. One week to prime, sand and paint.
Dry time 4 days.All new hardware and washers. Cleaned up and reused the bottom...
Thanks to 98Lee for his knowledge and willingness to educate me. After pursuing trying to locate (and budget) a spare spoiler to work on I elected to do the repair myself.
Before glassing and...
While on the hunt for a spare spoiler and fairing to paint and freshen up my 1994 K75S panels I had a great conversation with Tim who listed some panels in the Flea section.
Even though we did not...
Yes Sir. Front axle first then the clamp bolts fully only after letting the front wheel down and pressing down on the forks a few times - Thank you for asking :)