Search:

Anyone know what the new tire tread depth is on the PR3's?

For extended trips, wondering if most folks with a GPS will still have paper maps for backup/supplement? If so, what paper maps are most popular when it comes to size (i.e.- fold up, spiral bound,...

I just discovered the source of my confusion; nothing like actually doing the job. I thought the rubber boot over the connector was a separate piece from the large round cover, which I thought was...

See the attached picture. So what everyone is telling me, I think, is that the round plastic cover with the two tabs that surrounds the bulb and the rubber boot does not need to be removed? Just...

Are you referring to the rubber boot or the round black plastic cover that surrounds the bulb assembly? Not clear to me if that round cover needs to come off as well, and if so does it unscrew?

Ok, thanks. By accessory socket are you referring to the accessory plug on the left side of the dash or another plug?

Neat!! Thanks for the pic, very helpful. Where did you tap in for your 12 V relay signal? Bob

1999 R1100RT

Looking for a 12V switched signal source for auxiliary fuse panel. I am looking at using the brown/blue middle lead into what I think is the diagnostic plug which sits just aft of the...

Does the rubber boot simply pull off, or does it unscrew or need to be turned/rotated?

Any difference if you turn left or right? I believe most of the posts I have seen on this say to turn right. Thanks

OK, that should do it then. Thanks

Those are great pictures. I could not find a similar description in my manual. If I can establish that the spring clip is of similar design on the RT then I think I am set. Thanks again...

1999 R1100RT

Planning on doing a bunch of work on the bike this weekend, including a headlight bulb replacement and addition of the EasternBeaver relay harness to power the light directly from the...

That would be my question as well, and did you have to do anything with the temperature sensor that is mounted on top of the air cleaner lid? This would be an ideal location otherwise.

R1100RT

Looking for feedback from folks who have installed an auxiliary fuse block (fuzeblock, pc-8, centech, etc.) on a R1100RT to see where they have located the device on the bike. Thanks in...

R1100RT

Could not find a post on this. Is there an accepted best practice when installing spark plugs to use anti Sieze or not? Thanks