Search:

Type: Posts; User: wcycle; Keyword(s):

Page 1 of 2 1 2

Search: Search took 0.10 seconds.

  1. Replies
    8
    Views
    951

    R1200 GS rear flange

    I finished the job!! Thanks for your help. I purchased a air saw from harbor freight for $10.00, and blades for $7.00. I cut down through the old flange till I got close to the spines, it pulled off...
  2. Replies
    8
    Views
    951

    Rear flange

    Thanks for your help. Mine made it 127,400 miles. looks like a failure could be real real bad, I decided to have a friend/machinist make a puller, and order a new flange. I am really glad it didn't...
  3. Replies
    8
    Views
    951

    05 R1200GS rear wheel flange

    Anyone ever have the flange that holds the rear wheel and rear rotor crack or split the bolt holes? Took off wheel last night, the bolts were tight but there is a crack in the bolt holes. The rear...
  4. Weather is looking good!!!

    I just saw the weather for next weekend in the Laurel Highlands and it looks like it will be nice for the 11th annual campout. Highs in the mid !!!!70's and lows in the 50's - Great camping weather!...
  5. Replies
    9
    Views
    1,719

    Enjoyed the Music

    We were pleasantly surprised by the addition of the Jibber Jazz Festival. We will be attending again next year and bringing more friends with hopes that the music is back!;)
  6. Replies
    8
    Views
    634

    GS brakes

    Thanks for your reply, I do know how to bleed brakes, but was afraid of not being able to get them to work correctly after disconnecting the lines. so far so good. Got a big job ahead, need to get...
  7. Replies
    8
    Views
    634

    GS clutch replacement, brakes

    I was imformed you needed to get the brakes bled at a dealer because of needing to run the abs system with the BMW diag tool. I removed the sub frame without disconnecting any brake lines. Clutch is...
  8. Replies
    8
    Views
    634

    Transmission removal

    Thanks for all your help(except gsjay). Im gonna keep going, Will I have to take it to a dealer to get the brakes bled?
  9. Replies
    8
    Views
    634

    05 1200GS clutch service

    Has any one removed the sub frame on a 1200 GS to remove the transmission? I have started and want to do it with out disconnecting the brake lines, Is it possible? At 103,000 miles I think its due....
  10. Replies
    1
    Views
    361

    05 1200GS clutch check.

    I am working on getting to the clutch on my 2005 R1200 GS, Is there any way of taking off or holding the sub frame so I don't have to disconnect the brake lines? My bike has 103,000 miles and I am...
  11. Replies
    16
    Views
    1,773

    monkey nuts

    I think the cushions are to be installed with the piece that holds them together over the divider, one cushion on each side of the divider, not completly sure, check a manual. Good luck!!
  12. Replies
    10
    Views
    2,362

    1200GS noise

    Thanks for the ideas. I started the bike and left it idle for 5 minutes, then put on my gear and took it for a ride. after about 3 miles, it cleared up, sounds like new. I took a chance, but it...
  13. Replies
    10
    Views
    2,362

    R1200gs engine noise

    Thanks, I will look for a Haynes manual. Is there one on CD? The bike ran for 30 seconds or so, I shut it off, pulled the valve cover and checked the valve clearance. It was right on. The chain...
  14. Replies
    10
    Views
    2,362

    R1200GS engine noise

    I just got my 05 GS out of storage, checked it over, started it up for a warm up, and it has a loud engine noise from the left cylinder? Has anyone had this happen? Never had anything brake while not...
  15. Replies
    6
    Views
    857

    Thanks, Paul. I will check that option out.

    Thanks, Paul. I will check that option out.
  16. Replies
    6
    Views
    857

    Final drive tool

    I have the metric socket for the pinion nut. I am in need of the socket to remove the seal holder. It has four square slots in it. It is not a hex nut. Thanks for your reply.
  17. Replies
    6
    Views
    857

    Final drive tool needed

    I am in need of a tool to remove the nut on the pinion side of the final drive from a 04 R1150RS. It is the large nut with the four square slots in. I need to change the pinion seal. Does anyone know...
  18. Replies
    36
    Views
    7,668

    How do you clean your riding gear?

    Last year I purchased an awesome woman's BMW Belice riding suit. I love the suit and get a ton of compliments on how I look as if I came right out of the BMW catalog...lol. However, after many...
  19. Replies
    38
    Views
    3,760

    Brett, why didn't you call? I liked the needle...

    Brett, why didn't you call? I liked the needle nose vice grip Idea. Good luck

    Tim P.
  20. Thread: Wet R1150 RS?

    by wcycle
    Replies
    1
    Views
    513

    Wet R1150 RS?

    My wife just purchased a nearly new 2004 R1150 RS, After about 25-50 mile in the rain, it quits idling, and runs poor at 1/4 throttle. There are only 17,000 miles on it. everything looks like new....
  21. Replies
    2
    Views
    779

    I have run The Metezler ME 880 140/80-17 for...

    I have run The Metezler ME 880 140/80-17 for years. I run it on my wifes K75 S. She gets around 9,000 miles out of one. They will fit on K bikes from 1985 up to 1995 2 valve models. They make a...
  22. Replies
    3
    Views
    778

    My 1200 GS did the same thing. The slave cylinder...

    My 1200 GS did the same thing. The slave cylinder was shot, replaced it, worked great.
  23. Thread: Rough GS Idle ?

    by wcycle
    Replies
    7
    Views
    540

    Got the Mighty GS to Idle, It's not perfect, but...

    Got the Mighty GS to Idle, It's not perfect, but it starts, and idles. I set those throttle stop screws just a 1/16 from where they made contact on the throttle plate, Since this system uses a air...
  24. Thread: Rough GS Idle ?

    by wcycle
    Replies
    7
    Views
    540

    I don't have a gs911 tool. Where do I get one? I...

    I don't have a gs911 tool. Where do I get one? I am going to try the 1/8 turn idea you gave me, I will post how it worked. I am headed to the national, might be able to find one there? Thanks.:scratch
  25. Thread: Rough GS Idle ?

    by wcycle
    Replies
    7
    Views
    540

    Rough Idle

    Yes, these are the screws that were loose, I could tell they were tampered with before I got the bike, I adjusted the valves, and started to hook up my vacuum-mate when I noticed the lock nuts were...
Results 1 to 25 of 26
Page 1 of 2 1 2