Oil head valve adjustment question
Going to do a valve adjustment on my R1150GS and don't have a lot of experience with boxer motors. Purchased feeler gauges from wunderlich watched several videos on youtube on the subject and still have a couple of questions. When you find the "OT" mark on the flywheel via the inspection hole, are both cylinders at top dead center? Do you adjust the valves on both cylinders at that time?
Thanks in advance for input.
we got your valve adjustment thread right here!
Timing hole plug installation
Losing is never an issue if you center it to the bottom of a small hammer handle with a dab of grease.
Orient the oval correctly and push squarely over the hole. It will pop in easily and there is no risk of pushing it thru.
Came up with that years ago. No issues.:D