PDA

View Full Version : GPS Mount for K12GT



107865
07-17-2003, 09:26 PM
Does anyone have any idea how to mount a Garmin V GPS on a K1200GT? Where can I get the mounts?

Thanks!

lancew
07-17-2003, 09:54 PM
Peter,

take a look at this thread in the GEAR section:

http://www.bmwmoa.org/forum/showthread.php?s=&threadid=192

if that link doesn't work it's under "what electronic gadgets..."

There are a few discussions, also look here:

http://www.bmwmoa.org/forum/showthread.php?s=&threadid=215

Though the second one might be K12LT specific.

DISCLAIMER: I don't use a GPS myself- I already know I'm lost and don't need some machine to tell me that.

Good luck

bertbrumfield
07-18-2003, 01:40 AM
Ask the same questeion - or do a search at

www2.i-bmw.com. (be sure to use the www2)

Greg
07-18-2003, 07:15 AM
http://gerg.smugmug.com/photos/451394-M.jpg

All RAM stuff except for the V1 plate.

http://gerg.smugmug.com/photos/451393-M.jpg
And the sockets to power it all. No holes in the bike. Bracket is sandwiched to the dash support.

Greg

ljmattox
07-23-2003, 02:09 AM
Power sockets mounted on the dash support, nice touch.

Mounting bracket is (nicely) home-made, or vendor supplied?

kbasa
07-23-2003, 02:20 AM
Originally posted by Greg
http://gerg.smugmug.com/photos/451394-M.jpg

All RAM stuff except for the V1 plate.

http://gerg.smugmug.com/photos/451393-M.jpg
And the sockets to power it all. No holes in the bike. Bracket is sandwiched to the dash support.

Greg

Jeez, Gerg. I'm following you this weekend....

Greg
07-23-2003, 03:04 PM
Originally posted by ljmattox
Power sockets mounted on the dash support, nice touch.

Mounting bracket is (nicely) home-made, or vendor supplied?
Home brew. The bracket is sandwiched on the brace. The two screws pinch a plate below. Used the big hole in the brace to pass the screws through.

Greg