PDA

View Full Version : top case wiring



WIT61
10-30-2007, 01:44 AM
I have a new topcase with a brake light which I would like to use. My new GS has can-bus, and I am wondering what I need to know to tackle this formerly simple project before I go splicing and dicing.....TIA

n1kcl
11-01-2007, 12:39 PM
just run the two wires from the top case to the two tailight wires. you'll probably have running lights and brake lights on your top case as the canbus runs 3vdc for running lights and 12vdc during braking.