GPS Mount for K12GT

[Peter Iron]

Does anyone have any idea how to mount a Garmin V GPS on a K1200GT? Where can I get the mounts?

Thanks!

[lancew]

Peter,

take a look at this thread in the GEAR section:

http://www.bmwmoa.org/forum/showthread.php?s=&threadid=192

if that link doesn't work it's under "what electronic gadgets..."

There are a few discussions, also look here:

http://www.bmwmoa.org/forum/showthread.php?s=&threadid=215

Though the second one might be K12LT specific.

DISCLAIMER: I don't use a GPS myself- I already know I'm lost and don't need some machine to tell me that.

Good luck

[bertbrumfield]

Ask the same questeion - or do a search at

www2.i-bmw.com. (be sure to use the www2)

[Greg]

http://gerg.smugmug.com/photos/451394-M.jpg

All RAM stuff except for the V1 plate.

http://gerg.smugmug.com/photos/451393-M.jpg
And the sockets to power it all. No holes in the bike. Bracket is sandwiched to the dash support.

Greg

[ljmattox]

Power sockets mounted on the dash support, nice touch.

Mounting bracket is (nicely) home-made, or vendor supplied?

[kbasa]

Originally posted by Greg
http://gerg.smugmug.com/photos/451394-M.jpg

All RAM stuff except for the V1 plate.

http://gerg.smugmug.com/photos/451393-M.jpg
And the sockets to power it all. No holes in the bike. Bracket is sandwiched to the dash support.

Greg

Jeez, Gerg. I'm following you this weekend....

[Greg]

Originally posted by ljmattox
Power sockets mounted on the dash support, nice touch.

Mounting bracket is (nicely) home-made, or vendor supplied?
Home brew. The bracket is sandwiched on the brace. The two screws pinch a plate below. Used the big hole in the brace to pass the screws through.

Greg