Torque Specs

[roadcrave]

I putting new tires on my bike and need the torque specs for the rear wheel,and the torque specs for the front rotor and front spindal bolt on my 2003 k1200lt...matthew

[riderR1150GSAdv]

Ok Here it goes; Rear wheel bolts initial tightening is 50 NM, final tightning is 105 NM.
The front calipers to the forktube are 40 NM. The front wheel axle is initial tightning 19 NM, final 30 NM and the pinch bolts are 21 NM.
Make sure you set the torque wrench on the NM scale and NOT to the ft/pnd scale. Also before final tightning of the front axle bolts push the front suspension down a few times to settle everything in.
Have fun, hope it helped. :D

[roadcrave]

Thankyou..matthew

[riderR1150GSAdv]

You're welcome!!