Sticky Throttle

[Kev95GS]

Howdy,

Need a little help. I just changed the throttle cable on my 95 GS and can't seem to get the throttle to spring back. I also changed the choke cable while I was in there and it seems to be OK.

Any suggestions on where to start with the cable adjusters, should I lub the pulleys on the throttle bodies?

If I can ever get it to spring back I will then sync the TB.

Any help is appreciated.

Thanks

[kbasa]

Check the hand guards and make sure they're not rubbing on the end of the twistgrip. Also, check to make sure the switch cluster isn't a bit too far down the bar. It can cause the end of the inside of the twistgrip to hang up on the end of the bar.

[Kev95GS]

Thanks! I think it was in the twistgrip, I greased the barrel at the end of the cable and adjusted the switch housing and its better.

Now I have a fuel line leak at the injector on the left TB. I guess I did something when I put the new cable on, but its leaking where the line connects to the boot.

Oh Well, more time in the garage!

Thanks again KBasa.