Master Cylinder Rebuider

[Bob_M]

I recall from somewhere there is a machinist who can sleeve brake master cylinders for our bikes. On my 1982 R100RS restoration project The rear brake master cylinder leaks. Can someone supply the machinist's contact information?
Thanx

[CJM]

I recall from somewhere there is a machinist who can sleeve brake master cylinders for our bikes. On my 1982 R100RS restoration project The rear brake master cylinder leaks. Can someone supply the machinist's contact information?
Thanx


Any good machine shop should be able to do it. But have you tried honing it and installing a rebuild kit? Worked on my 77XLCH when it was 20 years old.
But if no shop around your area can do it..call:

PETE HILL MOTORCYCLES
1402 W. BLUE RIDGE DR.
GREENVILLE, SC 29611
864-271-0528

Speak with Jackie(Mrs. Pete Hill). Tell her that I recommended them. And if you don't know who Pete is....5 times-4 consecutive-NHRA TOP FUEL CHAMPION 1/4 MILE 7.+@ 200+MPH...25 YEARS AGO WITH A MODIFIED KUNCKLEHEAD.
He builds his own fuel injection systems, heads cylinders etc...from scratch!
He should be able to do a master cylinder.

MTBATP