Tinboatcapt
01-14-2005, 07:27 PM
I needed to replace several of the illumination bulbs in the instrument cluster and came up with a question I could not find an answer for in my manual or clymers.
I have a functional low fuel light that lights at a little less than one gallon remaining. When I removed the back of the unit, there is another empty slot for a bulb holder that would correspond to a second spot on the front under the "Low Fuel" label. Is there circutry for a bi-level warning on this bike? Would I gain anything from adding a bulb & holder to this slot?
The slot I am describing is the one second from the right at the bottom of the photo. The functional low fuel warning light is hidden behind the flex printed board.
I hope the photo's actually are attached. It's my first try at this.
Thanks,
Jim
I have a functional low fuel light that lights at a little less than one gallon remaining. When I removed the back of the unit, there is another empty slot for a bulb holder that would correspond to a second spot on the front under the "Low Fuel" label. Is there circutry for a bi-level warning on this bike? Would I gain anything from adding a bulb & holder to this slot?
The slot I am describing is the one second from the right at the bottom of the photo. The functional low fuel warning light is hidden behind the flex printed board.
I hope the photo's actually are attached. It's my first try at this.
Thanks,
Jim