JeffPGA
09-17-2004, 09:08 PM
I just purchased one of these for my 96 1100RT. It still seems to be using up oil and I have noticed a little on the head around the filler cap. I have a couple of questions for those wiser than me in the BMW world (I've always had Hondas before this bike).
1) Do these bikes typically use up oil? I bought this bike in May of this year with 12K on it and it now has a little over 19K. I keep the oil at the top of the sight glass and, after every 600-800 miles find that it is down at least to the middle of the glass. A service tech at Blue Moon Cycle told me that these bikes may take 20k to "seat" but I am curious. Never had anything but water cooled engines before and never had to add oil between changes. What's normal?
2) To install this cap I have to remove the Cyl head cover. Do I need to drain the engine oil first? Anything I should be aware of or can I just unbolt the cover and do the job. I know I need to get a manual but just haven't gotten to it yet. If its a complicated job, I'll just wait till the next service and replace it then
Thanks!
Jeff in GA
1) Do these bikes typically use up oil? I bought this bike in May of this year with 12K on it and it now has a little over 19K. I keep the oil at the top of the sight glass and, after every 600-800 miles find that it is down at least to the middle of the glass. A service tech at Blue Moon Cycle told me that these bikes may take 20k to "seat" but I am curious. Never had anything but water cooled engines before and never had to add oil between changes. What's normal?
2) To install this cap I have to remove the Cyl head cover. Do I need to drain the engine oil first? Anything I should be aware of or can I just unbolt the cover and do the job. I know I need to get a manual but just haven't gotten to it yet. If its a complicated job, I'll just wait till the next service and replace it then
Thanks!
Jeff in GA