Mounting driving lights on an 02 GS Adventure

[bmdubyou]

I have some 4" PiAAs ready to install on an 02 GSA but cant figure out where to place them. I've seen a few pics of them mounted somewhere under the turn signals but cant really tell how they are attached. In the past with my airheads I mounted them on the crashbars with bar clamps but the crashbars on this bike are not parallel which would put the lights at an angle. Any ideas??
:bolt

[GlobalRider]

I've seen a few pics of them mounted somewhere under the turn signals but cant really tell how they are attached.

There are various light bars out there.

If you can find one, try to get a TerraNova light bar. It is the sturdiest and most well thought out of all of them. I have one on each of my GS Adventures. Buying one of these used is better than buying any of the others new.

[GlobalRider]

If you haven't done any of the wiring yet, these two articles may be of help...

R1150 GS Driving Light Relay & AutoSwitch Install (http://www.bmwmoa.org/forum/showthread.php?t=8669)...an installation without having to cut into any wiring.

R1150 GS Blue Sea 5025 Fuse Block Install (http://www.bmwmoa.org/forum/showthread.php?t=8659)

R1150 GS Adventure Tech Stuff (http://edelweiss.smugmug.com/Motorcycles/315410)

[bmdubyou]

Yeah...just what I was looking for-there were some pics there that will help-thanks! I havent even got to the wiring yet so I will look at the other links too! :dance