jforgo
02-27-2009, 01:07 PM
OK – I have a 1982 R100RS I am going thru. There have been some issues with how the PO installed the left side Euro Switch (allows headlight on/off). Anyway, the only issue left is I cannot get the horn switch to trigger the horn.
I have checked the terminations of the green/black and brown/white wires in the shell – there is continuity upon horn switch activation. Both fuses are good. At one point I had one of the brown/white to a section above the “H” on the circuit card (stupid me!), which caused the horn to activate on the use of the hi/lo, so I know the horn itself works.
So now I have the two brown/whites on the two appropriate slots, and the green black to the top fused left-as-you-face-in terminal. Horn does not work.
What am I missing here?
I have checked the terminations of the green/black and brown/white wires in the shell – there is continuity upon horn switch activation. Both fuses are good. At one point I had one of the brown/white to a section above the “H” on the circuit card (stupid me!), which caused the horn to activate on the use of the hi/lo, so I know the horn itself works.
So now I have the two brown/whites on the two appropriate slots, and the green black to the top fused left-as-you-face-in terminal. Horn does not work.
What am I missing here?