PDA

View Full Version : dobeck fuel injection control


rockstercoop
10-18-2008, 12:29 PM
What is the secret to dialing in a dobeck controller. I have an 04 rockster with a k&n air filter and I replaced the air intake tubes with the larger shorter r1150rs tubes. If somebody might know the exact settings that would be great!

jm1515
10-18-2008, 03:49 PM
Goto here and browse around...............

http://www.dobeckperformance.com/forum/category-view.asp

It would be helpful to know which model you have.
FWIW, I installed a Techlusion R259 3yrs ago to 'cure' a lean fuel map. On an otherwise stock Roadster (except for the sparkplugs), I run the Techlusion with the settings much lower than recommended and have had great results.
My R runs much better with the unit in, the spark plugs look much better than OE, I'm getting just over 44.5mpg in the last ~30000miles, and I use 87octane gas without any neg affects at all.

rockstercoop
10-19-2008, 09:57 AM
:rocker thanks alot, I checked out that forum and somebody should have an answer for me. By the way, what brand sparkplug did you go with?

jm1515
10-19-2008, 04:58 PM
NGK Iridiums...........

BKR7EIX for the primary &
DCPR7EIX for the secondary