Oil Pump Cover Bolt Torque

[King]

R75/6 - Does anyone know the correct torque for the oil pump cover? The countersunk screws were replaced with hex-head bolts back in the 70's. I didn't write down the torque spec and I've slept since then. The bolts are M6 with a 9.8 strength rating. Thanks.

[20774]

Should be here...try to verify with another source just to be sure...

http://bmwmotorcycletech.info/torquevalues.htm

[King]

Thanks! Cool info. You folks on this forum are the best.