BMW led brake light,harness,for canbus

[tomm51]

Just installed a BMW led brake light and harness.Light has bracket that mounts to liscense plate and 16 led light mounts a few inches below plate.I drilled a hole next to seat lock and fed harness thru hole.Remove passenger seat and plug into tail light harness.remove 2 phillips screws that hold tail light lense.Taillight bulb has 2 spades, remove the spade with the black insullator and plug in harness then plug harness back into bulb.Put lense and seat back on. Canbus freindly.Flashes 1 second when brakes first applied then an additional brake light.Also a taillight.Harness A is for R1200. 61 00 0 445 579. $38. Led brake light 63 00 0 445 578. $129.Not cheap but easy install.

[BillSpurgeon]

Just installed a BMW led brake light and harness.Light has bracket that mounts to liscense plate and 16 led light mounts a few inches below plate.I drilled a hole next to seat lock and fed harness thru hole.Remove passenger seat and plug into tail light harness.remove 2 phillips screws that hold tail light lense.Taillight bulb has 2 spades, remove the spade with the black insullator and plug in harness then plug harness back into bulb.Put lense and seat back on. Canbus freindly.Flashes 1 second when brakes first applied then an additional brake light.Also a taillight.Harness A is for R1200. 61 00 0 445 579. $38. Led brake light 63 00 0 445 578. $129.Not cheap but easy install.

How about some pictures?

Bill in Phoenix

[tomm51]

I will try to get pictures up this weekend.They also make a harness B for the K1200GT.