Shield extension

[treat61]

Can you help. I have a r1200r

I have gone throught a number of screens.( 20" cee bailey, the small ztechnik and how the larger just released ztechnik screen. ) Unfortunately i am still in need of about 2 inches in extension. I have contacted Laminar lip but they do not work with the Ztechnik screens as they have a different curvature.
I have seen a number of older bikes with what look like home make? extensions
on their fairing/shields.

Any suggestions where I could acquire or purchased ?

Thanks, Brian from Burlington, Canada

[Andy VH]

I bought an adjustable windshield "spoiler" from Twisted Throttle that I mounted to the top edge of my Parabellum windshield on my R1100RS. I feel it is the only thing that really does work to reduce buffetting and it gives me some fine-tuning adjustment of the windshield edge to move the air bubble up.

Its made by MRA, costs about $75 and really seems to work. More than I can say for the different windshields I have tried, and that goofy looking Saeng edging, which didn't work.

http://www.twistedthrottle.com/trade/productlist/339

[alien_hitchhiker]

Brian, over the years I've fashioned several windshield extensions, using both plexiglass and donor windshields. The link below shows one attached to a standard BMW screen using nylon hardware - bolts, nuts and spacers. The extension is cut from a donor screen. You may need to scroll down to post #63

http://www.bmwmoa.org/forum/showthread.php?t=7751&page=5

I've also mounted them with plastic hinges which allowed for adjustability, which I fabbed up from bicycle reflector mounting bits.

These have always worked extremely well. The only drawback is that they do, indeed, look homemade.

Currently I am using a Cee Bailey #2 Euro cut on the R1100RT in the picture. For me, the CB is perfect.