PIAA 1100X Instalation on an RT

[AKBeemer]

I've searched for a prior thread on this topic with no joy. I'm looking for pointers on installing the PIAAs on an 07 RT. The instructions are pretty sparse, at least for someone with a modest skill level in electrical projects. Pictures will be great as will information on cable routing, locating a switched power source and location of the lights.

[wsteinborn]

You can use their nounts, on the fender or caliper bolts, or buy bracket which mount them right under the oil cooler.

[SilverRT]

Here is a picture of my PIA lights. I used a Autoswitch 5P high beam trigger switch
to control the lights through the brights control. The fender can take a hit when you turn sharp and hit a high curb at slow speed so I take care to cross high curbs straight.

http://i220.photobucket.com/albums/dd221/mgnksn/PIA1100x.jpg

[Ctrod]

Here is a picture of my PIA lights. I used a Autoswitch 5P high beam trigger switch
to control the lights through the brights control. The fender can take a hit when you turn sharp and hit a high curb at slow speed so I take care to cross high curbs straight.

http://i220.photobucket.com/albums/dd221/mgnksn/PIA1100x.jpg

I like the way you mounted the lights. Thanks for the tip about them hitting the fender. I put a big dent in the top of my H-D fender with a stupid bell I bought in Laconia one year.