2002 R1100s clutch problem

[p1800cpe]

Hello my r1100s clutch will not disengage properly, the bike only has 6000 miles on it and I have already bled the lines and fluid is good, please help any input would be greatly appriciated. Thanks, Tommy

[BreadMan]

Can you describe the problem with more detail?

[BubbaZanetti]

if you've just bled the line, try bleeding it some more. last time i changed the fluid in the clutch on my S, it took a lot of bleeding before proper engagement was returned.

[klennop]

Hello my r1100s clutch will not disengage properly, the bike only has 6000 miles on it and I have already bled the lines and fluid is good, please help any input would be greatly appriciated. Thanks, Tommy

You may get more help on the forums here: www.pelicanparts.com

[p1800cpe]

The clutch just stoped disengaging fully and I have bled it quite a bit but it just wont work right, could the master cylinder or slave cylinder be bad?

[p1800cpe]

The clutch just stoped disengaging fully and I have bled it quite a bit but it just wont work right, could the master cylinder or slave cylinder be bad?

when you bleed the slave cylinder does the fluid usually bleed with some pressure or does it just trickle out? When I bleed the fluid just trickles , I have bled 3 master cylinders full still no clutch. Is their a test to see if the master is failing?