View Full Version : R100 Cs??
I just purchased another airhead, the owner claims that it was an R100CS. The title hwever does not reflect the "CS". It doesn't matter very much to me as I do like the bike but I did read that the CS makes it "more desireable". It is a 1982. I have read that some people have serial numbers in such a range as to indicate it was a CS. Does anyone have any idea how I can tell exactly what model I have? Maybe a website where I can look up serial number ranges and their model numbers?
Thanks very much,
Jinx
escorial
03-11-2008, 06:45 PM
Probably just a R100 which is the same in every aspect (power, dual disc, 40mm Bing etc) as the CS except for the name. Do not mistake the R100/7 with the latter R100. You could probably call a dealer and give then the last 7 digits of the vin.
Also depending on the state I have had R100RS's from the 70's and the title just said R100 but the vins were correct for the RS. If you want to post you last 7 digits I could look on the microfiche here and see. Or I believe that there was a online site from the ETK that you could run the vins but I have been away from the BMW's for quite awhile and would not know where to look.
John
I just purchased another airhead, the owner claims that it was an R100CS. The title hwever does not reflect the "CS". It doesn't matter very much to me as I do like the bike but I did read that the CS makes it "more desireable". It is a 1982. I have read that some people have serial numbers in such a range as to indicate it was a CS. Does anyone have any idea how I can tell exactly what model I have? Maybe a website where I can look up serial number ranges and their model numbers?
Thanks very much,
Jinx
keelerb
03-11-2008, 06:47 PM
Or use the online VIN decoder - http://www.bmw-z1.com/VIN/VINdecode-e.cgi
20774
03-11-2008, 06:57 PM
According to Ian Falloon's book, R100CS production for the US was 4 in 1982...for other markets, there were 1276 produced. The VIN numbers range from 6188164 to 6188170 for the 1982 and 1983 runs...there were 3 US bikes in 1983.
The guy thought it was a cs as far back as 92 I have his records of service from Mortons and captial cycle with it written up as a R100CS The vin is comming up R100T it does not look like a T any more . The books I have show the compression higher for the CS 9/1 compared to R100 8/1 5hp. difference. color is right . I am going to clean it up fix some things and ride her. All your imput was helpful.
lkchris
03-12-2008, 10:48 AM
IF it's a CS, the color will be "classic black," i.e. gold metalflake black.
Unless it's an '84 "last edition" of course.
If that's not the color, it's not a CS.
If it's been repainted to something else, all supposed CS "value" is gone.
kbasa
03-12-2008, 11:35 AM
I'm told that VINs don't necessarily indicate a proper CS, especially for the LE bikes. Apparently, the bikes were primarily built as R100s and bodywork was added to them when they got to the US.
rkildu
03-12-2008, 11:49 AM
I also have an 82 that was supposed to be a CS. It had the S fairing, removed by the original ownerand replaced with a Luftmeister fairong and wider bars. It has drum rear brake and the side covers and seat fairing badge said only "R100". Color Avis Black with red and white pin stripes, Snowflake wheels. On the VIN number lists it shows up as an R100US.
I have a PDF copy of the 1982 BMW brochure. It shows no CS. But it shows the R100 in both the bare bike and S fairing variations.
Yours may be the same.
Rod
in Mick Walkers book BMW Twins restoration cs from 82-84 colors are listed as dark blue back hells silver smoked red. curiouser and curiouser.
jinx
lkchris
03-13-2008, 09:11 AM
Yes, those colors are listed in ETK, although the silver applies only to "exclusiv sport."
Nevertheless, only CS sidecover stickers available are gold (last edition not available).
A USA dealer adding a fairing did not create a CS, and it should be obvious that R100 sidecover decals indicate not a CS as well. Clearly there was never a black with red/white pinstripes CS
Here are respectively scans from 1981 and 1984 USA brochures--note the wheel change.
IMHO best indicator of a true CS is a "506" paint code sticker on the rear fender (classic black)
kbasa
03-13-2008, 10:06 AM
I know a guy that can hook you up with some LE stickers. :deal
r60us
03-14-2008, 04:00 AM
I dusted off my BMW microfiche and looked up the VINs for the 1982 R100CS US models:
6188163-6188163 08.81
6188164-6188164 10.81
6188165-6188166 06.82
6188167-6188167 09.82
6188168-6188168 10.82
Three R100 CS models were built to US specification for the 1982 model year (09.81-08.82).
If your bike isn't one of the above numbers, I suggest you contact Mobile Tradition for confirmation of the mm/dd/yy of manufacture, model, delivery destination, etc.
boxerr
03-17-2008, 05:00 AM
Just checked one that is on Ebay Australia, and it comes up as genuine R100CS, 10/81 as described. Vin 6136769.
Very nice bike!!:thumb
That checker works!! Just did my GSPD.
vBulletin® v3.8.6, Copyright ©2000-2012, Jelsoft Enterprises Ltd.