2002 1150r brake question

[John832]

I recently saw that I was leaking brake fluid at the caliper on the back brake. After removal of the caliper to see where the leak was coming from (never did see the leak) I can no longer get presure back to the caliper. I removed the brake line at the caliper and pump the brake pedal and no fluid sprayes out of the line. There is plenty of fluid in the resivor? Any ideas...this is a ABS model

[FredRydr]

The fluid in the circuit from the lever to the servo unit is separate from fluid in the circuit from the servo unit to the caliper.

Fred

[John832]

The fluid in the circuit from the lever to the servo unit is separate from fluid in the circuit from the servo unit to the caliper.

Fred

Can you tell me how I should go about getting presure to the caliper? I am not very familiar with this as you can tell. Thanks...

[FredRydr]

John,

As familiar as I was with it over 63,000 miles, I was too chicken to mess with it and I left servicing of the ABS III to my mechanic. The separate circuits needed his pressure bleeding equipment. The brakes were wonderful in all respects except the extra labor and equipment required for servicing.

Fred
'07 R1200R (new generation ABS II)

[John832]

Thanks Fred,
I live 175 miles from Nick's of Green Bay Wisconsin. I guess that I will drive it to him and have it serviced there.