Andy VH
07-20-2007, 08:41 AM
Anyone know the part number for the 3.5bar fuel pressure regulator? I heard the stock regulator is rated at 3.0bar. I may try the higher output regulator for a bit improved performance with other mods I have made to my 94 R1100RS.
So far I have done the following
1. GS intake tubes for stronger mid-range torque.
2. K&N air filter installed in the stock airbox
3. Modifier intake manifolds (between the throttle bodies and the heads) to smooth out the steps in the stock manifolds.
4. A free-flow muffler (of my own design) which I made from a scrapped stock RS muffler. I'll have this installed as soon as I get it TIG -welded.
5. Autolite 3924 plugs.
I like the smoothness and better response of the bike when on partial "choke". So I'm guessing I may get the same response with a higher output fuel regulator.
If you happen to know the part number and source for the 3.5bar regulator please let me know. Thanks.
So far I have done the following
1. GS intake tubes for stronger mid-range torque.
2. K&N air filter installed in the stock airbox
3. Modifier intake manifolds (between the throttle bodies and the heads) to smooth out the steps in the stock manifolds.
4. A free-flow muffler (of my own design) which I made from a scrapped stock RS muffler. I'll have this installed as soon as I get it TIG -welded.
5. Autolite 3924 plugs.
I like the smoothness and better response of the bike when on partial "choke". So I'm guessing I may get the same response with a higher output fuel regulator.
If you happen to know the part number and source for the 3.5bar regulator please let me know. Thanks.