PDA

View Full Version : 1150 GS Adv seat conversion question


cycle_guy
07-17-2007, 02:51 PM
Can someone tell me what the mounting parts and part numbers I'd need to convert a 1150GS Adventure seat to a standard 1150 GS seat.
I'll find a used 1150 GS seat somewhere
Thanks
Don

PUDGYPAINTGUY
07-17-2007, 10:30 PM
Probably the easiest thing to do would be to go to A&S BMW website and look at the microfiche online and you can see the sub frame assembly and other stuff you may need too. From what I understand the sub frame is the biggest difference to take the one piece saddle.

Mika
07-17-2007, 11:11 PM
This is what you have:

http://m1ka.smugmug.com/photos/174238889-L.png


No Part Number Description Qty

01 52537664433 lock support BUY 1
02 06327651204 fillister head screw (M6X16 A2) BUY 4
02 46637653731 oval head screw (M6X16 SW) BUY 4
03 52537664291 bracket BUY 1
04 07119920148 fillister-head screw (M6X12-ZNS) BUY 2
05 16112323615 bump stop BUY 2
06 52537654284 supporting bracket BUY 2
07 07119900555 fillister-head screw (M5X16) BUY 4
08 51257664847 bowden cable (365MM) BUY 1


What you would like to have:

http://m1ka.smugmug.com/photos/174238844-L.png


01 52532313289 bow BUY 1 $42.00
02 62217670749 grommet BUY 4 $2.50
03 12131459053 bush BUY 4 $2.00
04 07119919717 fillister-head screw (M6X30) BUY 4 $1.90
05 07119900555 fillister-head screw (M5X16) BUY 8 $0.75
06 52532313291 serrated ajustment BUY 4 $13.10
07 07129926512 cage nut (M6) BUY 6 $0.96
08 52531230319 rubber support BUY 6 $1.90
09 52532313288 cover (BLACK) BUY 1 $21.25
10 52532325201 badge (D=45) BUY 1 $9.15
11 52531451393 expanding nut BUY 2 $0.50
13 52532313419 locking bar BUY 1 $12.00
14 07119931044 flat washer (A6,4) BUY 2 $0.54
15 07119919712 fillister-head screw (M6X16) BUY 2 $0.70


Parts are easy. The sub frame may require modification to allow mounting what you want. Additionally you may find that trim and side panels will not line up properly.

If ypu do it and want to sell your old parts send me a pm.

cycle_guy
07-18-2007, 07:35 AM
Mika

Thanks, this is exactly what I needed. I talked to Bill Mayer in West Bend and he highly recomended this conversion. He said he had done the same thing to an adventure he had owned.

Don