PDA

View Full Version : How would YOU mount a zumo

LARGE JOHN
04-16-2007, 05:57 PM
On a K1100RS with no room behing the fairing???

Anybody build a crossbar off of the wing tightening fasteners???
cayuse60
04-16-2007, 06:30 PM
Carefully....:brow :D
Mudbug
04-17-2007, 11:56 PM
No don't use the wing tightening fastener screws.

I used the 5mm screws above them securing a gadgetguy.net bracket. Works perfectly.
LARGE JOHN
04-23-2007, 10:30 PM
No don't use the wing tightening fastener screws.

I used the 5mm screws above them securing a gadgetguy.net bracket. Works perfectly.



do you have a photo of that???:D
RandallIsland
04-23-2007, 10:46 PM
No don't use the wing tightening fastener screws.

I used the 5mm screws above them securing a gadgetguy.net bracket. Works perfectly.

I just use one big 69mm screw.
Upside down of course.
Kinda nice with a different perspective.
:dance
RandallIsland
04-23-2007, 10:48 PM
Yes, BTW, it leaves plenty of room.
Yes, I have pictures.
Yes, I cannot be a successful politician and show you them here.
:dance
LARGE JOHN
05-08-2007, 10:54 PM
No don't use the wing tightening fastener screws.

I used the 5mm screws above them securing a gadgetguy.net bracket. Works perfectly.


:clap THANKS IT WORKED PERFECTLY.!!!