What do I connect the accessory outlet cord to?

[OfficerImpersonator]

Just discovered that my accessory outlet installed in the cover for the ignition coils isn't wired to the bike.

Where should I connect the plug to the bike's electrical system?

Here's a diagram of what I'm talking about:
http://maxbmwmotorcycles.com/fiche/Diagrams/B0001809.png

Where does part #4 connect to the bike? I presume we want to use a fused circuit...

[AntonLargiader]

It goes in the front of the electrical box and connects inside there. The positive goes to the front of the fourth fuse down, and the negative goes to a ground wire on the round socket. If you already have a different accessory socket connected there, I think you'll need to use the dual harness.

[OfficerImpersonator]

Excellent - thank you. I've noticed I have a missing fuse on my fuse block at the fourth position down, so I'll presume this is the place to connect it. I'll connect the wiring, add a fuse, and be good to go!

Thanks again!