Help me find a screw

[Burnszilla]

The BMW parts fiche does not show the screw/bolt that screws through the fairing backing into the turn signal. You guys and gals out there with K75Cs, can you take a look at the screw I'm talking about and tell me it's size or maybe post a photo?

http://static.flickr.com/92/242500727_21557da2e0.jpg

Thanks!

[bmwmick]

Item #11?
http://www.realoem.com/bmw/showparts.do?model=0574&mospid=47904&btnr=46_0147&hg=46&fg=40
M6X12

[Burnszilla]

The screws that came with the bike was a course thread and a hex head nut (not allen). I think it was not stock. It's on Hwy 36 somewhere.
I will try #11 but I think it is too short, fine threaded and it's designed to screw into square nut #7. The signal light housing is plastic and needs a courser thread to 'catch' it.

On the turn signal fiche page there is a 32MM screw, but that is for the front signal of the K75S.

[bmwmick]

Sorry,
I thought your red line indicated the screw you were missing. :hungover
How about Item #4 here:
http://www.realoem.com/bmw/showparts.do?model=0574&mospid=47904&btnr=63_0362&hg=63&fg=10
It looks to be a course thread sheetmetal-style screw 30mm long.

[Burnszilla]

The red line is the screw I'm missing and the screw on the diagram that they don't show.

I thought of trying #4. I will when I get the chance. thanks.

Any photos out there?

[Eric1514]

Why don't you take the one out from the other side and go shopping at Orchard Supply or Home Depot?

Or am I missing something?
Eric

[kbasa]

You know those screws they use to hold the rear turn signals on? It's got the coarse thread? The one in the front is just like that, only longer.