View Full Version : Help Needed for Cell Phone Port on BC2 system
eh8125
06-05-2006, 02:28 PM
I got the cell phone port to work on the BC2 system. I have a 2002 K1200LTE. I have an issue with a humming noise. The person on the other phone says there is a loud humming noise. Any ideas what could be causing this?
gadwal
06-05-2006, 03:33 PM
Cell phones appear to be nothing but 2-way radio's and as radio's are prone to picking up ignition noise, either altnator hum or even the fireing of the spark plugs.. This was a major problem with cb radio's durring their early years; until the mfgs managed to filter it out. I was having the same problem with cell on my boat; finally had to route it away from all ignition sources to a isolated battery. There are filters (Radio Shack etc.) that will supposedly correct the problem, but I didn't find one that would completely elimate. Worth a try??
eh8125
06-05-2006, 07:15 PM
Here is an update.
Bike running or not, comm system on or off, ignition on or off, the caller hears buzzing sound on the phone. The sound appears once I plug the 2.5mm jack into the cell port on the comm system.
This makes absolutely no sense to me.
Any thoughts?
Stuff2C
06-05-2006, 08:44 PM
And we piss and moan about the dangers of cagers on cell phones :banghead
vBulletin® v3.8.6, Copyright ©2000-2012, Jelsoft Enterprises Ltd.