Member Tested: Real Reviews From Real Riders
Blog Home All Blogs
Our Member Tested program puts the best gear in the hands of real riders who give real reviews. You'll hear the good, the bad and the ugly about all the gear they have tested. But when it is over, you will know you can buy the best piece of equipment that is durable enough for MOA members. All product reviews must come from an active member (at the time of submission) and should include photos of the product being installed or used in some way. Drop an email to wfleming [at] bmwmoa [dot] org with your idea for a review or your completed review. Thanks!

 

Search all posts for:   

 

Top tags: R1200GS  seat  Mustang  Clothing  MemberTested  accessories  Aerostich  ATGATT  baselayer  BMW  Corbin  Gear  Luggage  R1200RS  Skills  Training 

Mustang R1200GS Seat

Posted By Stan Herman, Wednesday, January 28, 2015
 
Excellent for the Inseam Challenged

This is a high quality seat utilizing a steel seat pan, an ingenious adjustment method and it fits the bike exceptionally well. The Mustang seat hugs the tank contours and latches easily in place after installing the four bolt mount bracket. To install one removes four 8mm nuts, switches mount brackets and reinstall four nuts, it takes about 10 minutes. The seat looks custom made with excellent stitching. As a bonus an optional rider backrest is available.

This is an excellent seat for someone inseam challenged on a GS or GSA. It lowers the overall seating position by more than an inch from the factory seat. Different width, shape and where one measures make that a hard number to determine exactly. The foam is firm and well sculpted. The throat is also somewhat narrower allowing easier flat footing of the bike. I rode about 250 miles of paved Arkansas River canyons and paved mountain roads around Pikes Peak. I have a 32 inch inseam and the seat is simply too short for me even in the high position. I think it would best serve those with a 30 inch inseam or less. It moves the rider into a pocket both lower and closer to the tank. I think the Mustang is a very nicely crafted seat, but not for me.

 

 

Tags:  Mustang  R1200GS  seat 

PermalinkComments (0)
 

Mustang R1200GS Seat

Posted By Stephen Gregory, Wednesday, January 28, 2015
 Great Quality, But Not Built for Me

The first thing I took note of after receiving the Mustang seat was the quality of the leather and the overall feel. Top-notch. It has a nice cushion to it and soft feel. Really high quality.

Next I was under the impression that I would be able to simply remove my Corbin seat and replace it with the Mustang seat. Not true. There's a mounting bracket that you have to install. OK… not a big deal. Just remove the stock mounting guides from above the battery and replace them with the Mustang mounting bracket. Easy-Peasy.

Then I discovered that the seat has two spring loaded pins in the rear that allow you to easily select a lower option and a higher option. Pretty cool! I'm 6'0" so I went with the higher option. I imagine for those who are 5'9" or 5'10" the lower option would be a wonderful feature. Even with the seat set on the higher option I could reach the ground better than I can with my Corbin.

The Mustang seat is much narrower than the Corbin. The smooth leather and narrow throat allow you to easily slide and shift your weight while leaning into twisties, however the Mustang seat is just too narrow to be comfortable on longer rides. The Corbin saddle is wide and supports your butt in such a way that it ergonomically lessons road fatigue.

The Mustang seat, similar to the stock seat puts pressure points on your inner thighs making for much less comfortable long distance rides. After an hour on my first ride with the Mustang seat, I was glad to have arrived at the trail head just so I could start standing up! I then took it on some very challenging mud trails and got it pretty dirty. The leather held up every time I dumped the bike and had to drag it across some rocks to pick it up. The leather cleaned up nicely as well.

I also tested the back rest with my highway pegs and it felt really good. There is a Corbin back rest in my future. If you get this seat I recommend getting the back rest and some highway pegs just so you can shift your legs and body when your butt starts getting sore on longer rides.

My wife accompanied me on another hour long ride to breakfast one morning and tested the pillion seat. She was not aware that I had replaced my stock pillion seat with the Mustang and at breakfast she was complaining about the uncomfortable ride. When I told her it was a different seat she said that would explain it. And that she had never been uncomfortable before on such a short ride.

To sum it up - the seat is great quality but too narrow for comfortable long distance rides.

 

 

Tags:  Mustang  R1200GS  seat 

PermalinkComments (0)
 

Mustang R1200GS Seat

Posted By Bill Wiegand, Wednesday, January 28, 2015
Quality for Eight Hours!

Probably the most important connection a rider has with their motorcycle comes through their seat, as the level of comfort a rider experiences there is directly proportional to the enjoyment received while riding. Finding a comfortable seat can be a difficult task; but if you do, you will be rewarded with miles upon miles of never ending smiles. By contrast, ride for 10 hours on an uncomfortable seat and you’ll think twice about riding again.

Personally, I ride a 2012 R1200GS Rallye; while I love the styling and look of the stock seat, spending more than a couple continuous hours in the saddle has me squirming around looking for a comfortable spot that just isn’t there.

A new seat has been on my wish list for some time. I do have experience with two aftermarket seats, but neither provided me what I was truly looking for…a seat that not only looked great but allowed me to ride for at least eight continuous hours without feeling like I was being punished for a crime I hadn’t committed. A comfortable eight hours isn’t an Iron Butt request by any means, but more than I was receiving from my stocker and a performance level with which I would be happy.

When I saw the Mustang Seat box sitting in my office, I immediately wondered who wasn’t going to receive their Harley seat that day. I opened the box anyway and, to my surprise, inside was a new seat made specifically for the 2005–12 R1200GS and GSA. Low and behold, Mustang is now producing seats for BMWs.

Upon initial inspection, the seat looked very good and was solidly constructed. A metal seat pan and a premium, leather-like vinyl material enveloped the interior foam padding. I eagerly awaited installation and an initial road test.

Unlike other seats I’ve seen and tried for my bike, the Mustang uses a proprietary front seat bracket which replaces the stock front seat mounts. In the rear, two adjustable pins offer high or low positioning, as do the slots on the front bracket when mated with the tongue mounted on the seat pan. After the 10 minutes needed for installation of the bracket, the seat was mounted and because the rear seat uses the same mounting method as the stocker, a few seconds later I was ready to go.

The initial appearance of the seat on the bike was very good, though the profile of the seat appears shorter than the stocker or other aftermarket seats I’ve tried, allowing the upper frame sections, components usually hidden by other seats, to be visible. Not that big of a deal and it was time to hit the road.

I’d planned on using the seat on a 1,300-mile round trip to South Carolina I’d scheduled in about a week; I used a short, 50-mile shakedown ride for an initial impression. After that short ride, all systems were go and during that first ride, I found the seat felt good, the vinyl had the right amount of tack and didn’t let me slide around. The shape of the saddle fit well and I was truly beginning to think I just might have found a long-term solution to riding comfort. I knew 1,300 miles awaited and, once my trip was completed, I’d have the information I sought.

On the first day of the trip we rode just over 475 miles, and I can truly say I was pleased with the seat. The “hot spots” I experienced on other seats weren’t there, and when I got off the bike that day I felt good and knew I could have ridden longer. The final 175 miles to Spartanburg the next day were a piece of cake. I left Spartanburg alone three days later with the intent to pound out all 650 miles, stopping only for gas. Though I made it, once I passed the eight-hour mark my remaining time in the saddle grew more and more difficult as the miles and the time continued to accumulate. Looking back, I wonder if any seat can truly be comfortable for more than eight hours.

In the end (no pun intended), I can say that I could be truly happy with the Mustang if I never intended to travel more than eight hours in a day. Until I exhaust all of the aftermarket seats, I cannot say that this is the best option. What I can say is that the Mustang seat is a good looking, beautifully built seat that I would gladly use on all but the most demanding of trips. Until I am able to find backside nirvana, I will forever be in search of a seat offering the comfort of the La-Z-Boy in the den and the visual appeal of the stocker.

 

 

Tags:  Mustang  R1200GS  seat 

PermalinkComments (0)
 
Membership Software Powered by YourMembership  ::  Legal